Whiteline Sway bar Bushing Kit 26mm – 2003-2006 Mitsubishi Evo 8/9 / Lancer Ralliart 2008-2016

Whiteline Sway Bar Bushing Kit 26mm – 2003-2006 Mitsubishi Evo 8/9 / Lancer Rally

Correct 26mm Sway Bar Mount Bushings for Evo 8/9 and Lancer Rally
The Whiteline KSK049-26 is a 26mm sway bar bushing kit for the 2003-2006 Mitsubishi Evo 8/9 and Lancer Rally. The 26mm specification is correct for use with Whiteline’s 26mm diameter front sway bars (BMF48) on these platforms. Correct diameter bushings keep the bar precisely located in its mount brackets for maximum anti-roll effectiveness.

DETAILS

• 26mm sway bar mount bushing kit for Evo 8/9 and Lancer Rally applications
• Correct diameter for 26mm sway bar installations
• Polyurethane compound for firm, consistent bar location
• Knurled bore retains grease for quiet, long-term operation
• Fitment: 2003-2006 Mitsubishi Evo 8/9 and Lancer Rally

Why Diameter Matching Matters
A sway bar bushing must match the bar diameter exactly. Too loose, and the bar rattles and shifts in the mount. Too tight, and it binds rather than rotating freely. The 26mm KSK049-26 is the correct match for 26mm diameter bars on the Evo 8/9 platform.

Polyurethane for Firm Bar Location
Polyurethane compound keeps the bar firmly located in the mount bracket, preventing the lateral movement that reduces effective bar stiffness. The knurled bore retains grease for quiet operation over the life of the bushing.

Lancer Rally Application
The Mitsubishi Lancer Rally (Lancer Evo-based competition variant) uses compatible sway bar mount geometry for this bushing specification.

Why Choose Whiteline

Whiteline has been engineering suspension components from their facility in Australia since 1979. Every product in their catalog is developed with a clear goal: measurable improvement in handling, stability, and tyre contact. Whiteline’s polyurethane bushings, sway bars, control arms, and alignment correction kits are engineered using finite element analysis and validated on track before they reach the market. Their components are direct-fit, bolt-on solutions designed for enthusiasts who want real performance gains without fabrication or custom work.

The RallySport Take

The correct bushing for 26mm sway bar installations on Evo 8/9 and Lancer Rally. Installation is a straightforward bar swap — remove the OEM bar, install the Whiteline unit with the provided polyurethane mount bushings, connect the endlinks. Start in the middle adjustment position and move from there. Adjustable endlinks are a worthwhile companion purchase if the car has been lowered, ensuring the bar operates at zero preload at the new ride height.

What’s in the Box

• 26mm sway bar mount bushing kit for Evo 8/9 and Lancer Rally applications
• Polyurethane compound for firm, consistent bar location
• Knurled bore retains grease for quiet, long-term operation

Fitment