Whiteline Rear Control Arm Bushing Kit – 2019-2022 Hyundai Veloster N

Whiteline Rear Control Arm Bushing Kit – 2019-2022 Hyundai Veloster N

Eliminate Compliance in the Rear Suspension of Your Veloster N
The 2019-2022 Hyundai Veloster N’s rear control arm bushings directly affect how precisely the rear suspension maintains its designed geometry under cornering, braking, and acceleration loads. Worn or compliant factory bushings allow the control arm to move in undesigned directions, producing toe steer and camber change that makes the rear end harder to read and less consistent. Whiteline’s polyurethane replacement bushings restore correct arm location and maintain it under load.

DETAILS

• Rear control arm bushing kit for 2019-2022 Hyundai Veloster N
• Polyurethane compound for improved arm location and geometry stability
• Addresses compliance-induced toe steer and camber variation
• Direct-fit replacement — no modifications required
• Corrosion-resistant hardware

The Veloster N Rear Suspension
Hyundai built the Veloster N with a rear multi-link suspension that provides genuinely good handling characteristics for a front-wheel drive performance car. Keeping the bushing compliance in check is what allows that geometry to work as intended. The higher cornering loads the Veloster N generates — compared to the standard Veloster — accelerate bushing wear and make geometry compliance more noticeable at the limit.

Rear Control Arm Geometry and FWD Handling
On a front-wheel drive performance car, rear suspension precision affects stability under trail braking and the ability to rotate the car into corners. Rear toe steer from worn bushings creates a car that feels unsettled mid-corner — the rear moves slightly with braking force rather than staying planted. Firmer bushings at the rear control arm restore the stability that allows you to brake later and carry more speed into corners.

Pair With Whiteline’s Full Veloster N Range
Whiteline covers the Veloster N with sway bars, endlinks, springs, and multiple bushing positions. The rear control arm bushing is one piece of a comprehensive chassis improvement package — combining it with the Grip Series kit and additional bushing positions gives the Veloster N the sorted, communicative handling balance it deserves.

Why Choose Whiteline

Whiteline has been engineering suspension components from their facility in Australia since 1979. Every product in their catalog is developed with a clear goal: measurable improvement in handling, stability, and tyre contact. Whiteline’s polyurethane bushings, sway bars, control arms, and alignment correction kits are engineered using finite element analysis and validated on track before they reach the market. Their components are direct-fit, bolt-on solutions designed for enthusiasts who want real performance gains without fabrication or custom work.

The RallySport Take

A solid maintenance and performance upgrade for any Veloster N, particularly one that has seen track time or autocross use. The rear end becomes more consistent and easier to work with at the limit. Budget an afternoon for the job — bushing replacement is not complicated but does require the correct press tools and clean installation technique. Apply grease to all polyurethane-to-metal interfaces and assemble at ride height for correct bushing set. The improvement in chassis feel is immediate and the polyurethane will outlast whatever rubber is in there now.

What’s in the Box

• Rear control arm bushing kit for 2019-2022 Hyundai Veloster N
• Polyurethane compound for improved arm location and geometry stability
• Addresses compliance-induced toe steer and camber variation
• Direct-fit replacement — no modifications required
• Corrosion-resistant hardware

Fitment