Whiteline Lower Inner Rear Offset Control Arm Bushings – 1999-2006 BMW 3 Series Models

Whiteline Lower Inner Rear Offset Control Arm Bushings – 1999-2006 BMW 3 Series Models

Camber Correction at the Rear Lower Arm on E46 BMW
The Whiteline W52606 uses offset lower inner rear control arm bushings to correct rear camber geometry on the 1999-2006 BMW 3 Series (E46). These eccentric bushings allow rear camber to be adjusted beyond the factory alignment range — essential for lowered E46 builds where standard alignment adjustment can’t fully correct the geometry.

DETAILS

• Offset rear lower control arm inner rear bushings for E46 BMW
• Provides rear camber correction beyond factory alignment range
• Allows geometry optimization for lowered E46 applications
• Polyurethane compound for consistent geometry under load
• Fitment: 1999-2006 BMW 3 Series (E46 chassis)

E46 and Rear Camber Correction
When an E46 is lowered, the rear camber moves outside the factory adjustment range. Standard alignment settings can’t fully correct it, leaving the car with incorrect rear camber that reduces tyre contact and handling balance. The W52606’s offset geometry provides the additional correction range needed.

Performance Camber for Track Use
For E46s used in track and autocross applications, the ability to run additional negative rear camber (beyond OEM spec) improves rear tyre contact under cornering loads. The W52606 provides the hardware capability for alignment shops to achieve these performance settings.

Combined With Front Correction
Rear camber correction is most effective when the front geometry is also correctly set. Whiteline’s complete E46 front and rear bushing range allows comprehensive geometry correction on both axles.

Why Choose Whiteline

Whiteline has been engineering suspension components from their facility in Australia since 1979. Every product in their catalog is developed with a clear goal: measurable improvement in handling, stability, and tyre contact. Whiteline’s polyurethane bushings, sway bars, control arms, and alignment correction kits are engineered using finite element analysis and validated on track before they reach the market. Their components are direct-fit, bolt-on solutions designed for enthusiasts who want real performance gains without fabrication or custom work.

The RallySport Take

Essential camber correction hardware for lowered and performance-aligned E46 3 Series. Budget an afternoon for the job — bushing replacement is not complicated but does require the correct press tools and clean installation technique. Apply grease to all polyurethane-to-metal interfaces and assemble at ride height for correct bushing set. The improvement in chassis feel is immediate and the polyurethane will outlast whatever rubber is in there now.

What’s in the Box

• Offset rear lower control arm inner rear bushings for E46 BMW
• Provides rear camber correction beyond factory alignment range
• Allows geometry optimization for lowered E46 applications
• Polyurethane compound for consistent geometry under load

Fitment