Whiteline Front Sway Bar 26mm – 2003-2006 Mitsubishi Evo 8/9

Whiteline Front Sway Bar 26mm – 2003-2006 Mitsubishi Evo 8/9

Aggressive Front Roll Stiffness for the Evo 8 and 9
The Whiteline BMF48 is a 26mm front sway bar for the 2003-2006 Mitsubishi Evo 8 and 9. At 26mm, this bar provides track-level front roll stiffness for Evo builds where maximum front anti-roll control is the priority. The Evo’s AWD and ACD systems benefit from a stable, controlled front axle under hard cornering.

DETAILS

• 26mm front sway bar for 2003-2006 Mitsubishi Lancer Evolution VIII and IX
• Solid spring steel construction
• Includes mount bushings and hardware
• Track and performance application
• Direct bolt-on installation

Evo 8/9 at 26mm Front Stiffness
The Evo 8 and 9 already run relatively stiff factory front bars compared to most other performance cars. The 26mm BMF48 is the step for builds that need more than the factory spec can deliver — time attack cars, circuit racers, and configurations where maximum front roll control is the setup goal.

AWD Balance at High Front Stiffness
Running 26mm front stiffness on the AWD Evo requires matched rear stiffness to maintain the front-rear balance the AWD system was calibrated for. The BMR65Z or BMR65XXZ rear bars provide the matching rear stiffness.

Non-Adjustable Design
The BMF48 is a fixed-rate bar. For adjustment capability at the 26mm spec, check Whiteline’s adjustable options. Fixed rate is appropriate when the 26mm setting is definitively correct for the application.

Why Choose Whiteline

Whiteline has been engineering suspension components from their facility in Australia since 1979. Every product in their catalog is developed with a clear goal: measurable improvement in handling, stability, and tyre contact. Whiteline’s polyurethane bushings, sway bars, control arms, and alignment correction kits are engineered using finite element analysis and validated on track before they reach the market. Their components are direct-fit, bolt-on solutions designed for enthusiasts who want real performance gains without fabrication or custom work.

The RallySport Take

Track-level front anti-roll hardware for the Evo 8/9. Installation is a straightforward bar swap — remove the OEM bar, install the Whiteline unit with the provided polyurethane mount bushings, connect the endlinks. Start in the middle adjustment position and move from there. Adjustable endlinks are a worthwhile companion purchase if the car has been lowered, ensuring the bar operates at zero preload at the new ride height.

What’s in the Box

• 26mm front sway bar for 2003-2006 Mitsubishi Lancer Evolution VIII and IX
• Solid spring steel construction
• Includes mount bushings and hardware
• Track and performance application

Fitment