Whiteline Control Arm Lower Inner Rear Bushing – 2006-2011 BMW 1/3 Series Models

Whiteline Control Arm Lower Inner Rear Bushing – 2006-2011 BMW 1 / 3 Series Models

Restore Front Precision on the E8x and E9x BMW
The front lower control arm inner rear bushing on the 2006-2011 BMW 1 Series and 3 Series (E8x/E9x) is the rearward inboard pivot of the front lower arm. This bushing primarily resists lateral cornering forces — when it wears, the arm develops angular play that allows front wheel geometry variation under cornering loads. Whiteline’s polyurethane replacement restores the precision the E8x/E9x front suspension was designed to deliver.

DETAILS

• Polyurethane compound for front lower control arm inner rear position
• Fits 2006-2011 BMW 1 Series (E81/E87) and 3 Series (E90/E92/E93)
• Reduces front wheel movement under cornering loads
• Improves front-end precision and handling consistency
• Limited Lifetime Warranty

E8x/E9x Front Suspension
The E8x BMW 1 Series and E9x 3 Series are sports-oriented platforms with sophisticated front suspension. The lower control arm’s inner rear bushing is a high-load position that directly affects front axle geometry. Track use and performance street driving accelerate wear at this position.

Inner Front vs. Inner Rear
The front lower control arm has two inner bushing positions. The inner front bushing primarily resists longitudinal forces (braking/acceleration). The inner rear bushing (this product) primarily resists lateral cornering forces. Both positions should be inspected and replaced together for the most complete front bushing improvement.

Complete E8x/E9x Front Refresh
Whiteline covers all E8x/E9x front suspension positions. The inner rear bushing pairs with the inner front bushing and front sway bar mount bushings for a comprehensive front end improvement.

Why Choose Whiteline

Whiteline has been engineering suspension components from their facility in Australia since 1979. Every product in their catalog is developed with a clear goal: measurable improvement in handling, stability, and tyre contact. Whiteline’s polyurethane bushings, sway bars, control arms, and alignment correction kits are engineered using finite element analysis and validated on track before they reach the market. Their components are direct-fit, bolt-on solutions designed for enthusiasts who want real performance gains without fabrication or custom work.

The RallySport Take

A key front bushing position on E8x/E9x BMW platforms. Correct it as part of any front suspension precision improvement project. Budget an afternoon for the job — bushing replacement is not complicated but does require the correct press tools and clean installation technique. Apply grease to all polyurethane-to-metal interfaces and assemble at ride height for correct bushing set. The improvement in chassis feel is immediate and the polyurethane will outlast whatever rubber is in there now.

What’s in the Box

• Polyurethane compound for front lower control arm inner rear position
• Reduces front wheel movement under cornering loads
• Improves front-end precision and handling consistency

Fitment