Whiteline Control Arm Inner Front Bushing – 2000-2006 Audi TT / TT Quatro / 1985-2005 Volkswagen Golf / 1995-2001 Cabrio / 2001-2012 Beetle / 1995-2005 Jetta / 1985-1993 Cabriolet / 1985-2003 Golf

Whiteline Control Arm Inner Front Bushing – 2000-2006 Audi TT / TT Quattro / 1999-2005 VW Golf

Tighten the Front Suspension on Your Mk4-Based Audi or VW
The front lower control arm inner front bushing on the 2000-2006 Audi TT and 1999-2005 VW Golf is the forward inboard pivot of the front lower control arm. As this bushing ages and softens, the arm gains fore-aft movement under braking and cornering loads that changes front geometry dynamically. Whiteline’s polyurethane replacement firms up this pivot point, restoring precision to the front suspension.

DETAILS

• Polyurethane compound for front lower control arm inner front position
• Fits 2000-2006 Audi TT and TT Quattro, 1999-2005 Volkswagen Golf
• Reduces front wheel movement under braking and cornering
• Improves front-end precision and response
• Limited Lifetime Warranty

Inner Front vs. Inner Rear Bushing
The front lower control arm has two inner bushings — front and rear. The front inner bushing (this product) primarily resists longitudinal forces — braking and acceleration. The rear inner bushing (WHLW53196) primarily resists lateral cornering forces. Both positions wear with use, and both benefit from polyurethane replacement. For the most complete front suspension improvement, address both positions together.

Mk4 Platform Response to Polyurethane
The Mk4 VW/Audi platform’s deliberately soft suspension tuning means these cars respond well to polyurethane bushing upgrades. The lower control arm inner positions are among the highest-load points in the front suspension — firming them up produces a meaningful improvement in front-end precision that’s immediately noticeable in steering response and cornering feel.

Part of the TT and Golf Front End Refresh
Whiteline covers the Mk4 platform comprehensively with front and rear bushing kits, sway bars, and endlinks. Doing the inner front bushing alongside the inner rear and sway bar mount bushings produces a comprehensive front suspension improvement.

Why Choose Whiteline

Whiteline has been engineering suspension components from their facility in Australia since 1979. Every product in their catalog is developed with a clear goal: measurable improvement in handling, stability, and tyre contact. Whiteline’s polyurethane bushings, sway bars, control arms, and alignment correction kits are engineered using finite element analysis and validated on track before they reach the market. Their components are direct-fit, bolt-on solutions designed for enthusiasts who want real performance gains without fabrication or custom work.

The RallySport Take

A targeted improvement for a high-load front suspension position on the Mk4 VW/Audi platform. High-mileage examples of these cars almost universally benefit from this upgrade. Budget an afternoon for the job — bushing replacement is not complicated but does require the correct press tools and clean installation technique. Apply grease to all polyurethane-to-metal interfaces and assemble at ride height for correct bushing set. The improvement in chassis feel is immediate and the polyurethane will outlast whatever rubber is in there now.

What’s in the Box

• Polyurethane compound for front lower control arm inner front position
• Reduces front wheel movement under braking and cornering
• Improves front-end precision and response

Fitment