Whiteline Adjustable Front Sway Bar 24mm – 2013-2018 Ford Focus ST

Whiteline Adjustable Front Sway Bar 24mm – 2013-2018 Ford Focus ST

Track-Level Front Roll Control for the Mk3 Focus ST
The Whiteline BMF64Z is a 24mm 3-point adjustable front sway bar for the 2013-2018 Ford Focus ST. At 24mm, this bar provides aggressive front roll stiffness for track-focused Focus ST builds where maximum front anti-roll is the priority. Three adjustment positions allow fine-tuning within the performance range.

DETAILS

• 24mm 3-point blade adjustable front sway bar
• Solid spring steel, silver powder coat
• Includes mount bushings and hardware
• 3 adjustment positions
• Fitment: 2013-2018 Ford Focus ST (Mk3)
• Track and performance application

Maximum Front Stiffness for the Focus ST
The Mk3 Focus ST responds to front bar stiffness increases with reduced body roll and sharper turn-in. The 24mm BMF64Z is for configurations where maximum front roll stiffness is the goal — track-prepared ST builds with matched rear bar upgrades and performance-oriented alignment.

FWD Platform Balance
On the FWD Focus ST, front bar stiffness affects understeer balance. Running 24mm without an appropriate rear bar creates additional understeer. Pair with the BMR93Z rear bar for balanced roll stiffness.

Three Positions in the Performance Range
All three positions are within the performance stiffness range. Adjust based on circuit conditions and rear bar setup.

Why Choose Whiteline

Whiteline has been engineering suspension components from their facility in Australia since 1979. Every product in their catalog is developed with a clear goal: measurable improvement in handling, stability, and tyre contact. Whiteline’s polyurethane bushings, sway bars, control arms, and alignment correction kits are engineered using finite element analysis and validated on track before they reach the market. Their components are direct-fit, bolt-on solutions designed for enthusiasts who want real performance gains without fabrication or custom work.

The RallySport Take

Maximum front anti-roll stiffness for the Mk3 Focus ST track build. Installation is a straightforward bar swap — remove the OEM bar, install the Whiteline unit with the provided polyurethane mount bushings, connect the endlinks. Start in the middle adjustment position and move from there. Adjustable endlinks are a worthwhile companion purchase if the car has been lowered, ensuring the bar operates at zero preload at the new ride height.

What’s in the Box

• 24mm 3-point blade adjustable front sway bar
• Solid spring steel, silver powder coat
• Includes mount bushings and hardware
• 3 adjustment positions
• Track and performance application

Fitment