Whiteline 24mm Front Sway Bar Mount Bushing Kit – 2002-2007 Subaru WRX (Sedan & Wagon) / 2004-2007 Subaru STI / 2003-2007 Subaru Impreza (Non-Turbo)

Whiteline 24mm Front Sway Bar Mount Bushing Kit – 2002-2007 Subaru WRX (Sedan & Wagon)

Lock In the Front Bar on Your GD WRX
Running a 24mm front sway bar on your 2002-2007 Subaru WRX? This is the correct mount bushing. Whiteline’s 24mm polyurethane front mount bushing keeps the front bar firmly located in its cradle, eliminating the axial movement and noise that worn OEM rubber allows. Knurled inner bore retains grease for long-term quiet operation.

DETAILS

• 24mm front sway bar mount bushing for 2002-2007 Subaru WRX (sedan and wagon)
• Whiteline polyurethane compound
• Knurled inner ID retains grease
• Direct-fit to OEM front mount bracket
• Limited Lifetime Warranty

Front Sway Bar Mount Function
The front sway bar mount bushings hold the bar to the subframe. Their job is to keep the bar from sliding axially while allowing the bar to rotate torsionally as the suspension moves. When worn, they allow the bar to shift position under cornering loads, reducing the effective roll stiffness the bar can provide. Polyurethane replacements eliminate that axial movement.

Common With Whiteline Bar Upgrades
If you’re installing Whiteline’s 24mm adjustable front bar — the BSF33X, BSF33XZ, or similar — this is the correct mount bushing to use with it. These bushing kits are designed to work together and are sold separately so you can replace only what’s needed.

Sedan and Wagon GD Coverage
Fits both sedan and wagon body styles on the 2002-2007 GD WRX. Confirm front bar diameter before ordering.

Why Choose Whiteline

Whiteline has been engineering suspension components from their facility in Australia since 1979. Every product in their catalog is developed with a clear goal: measurable improvement in handling, stability, and tyre contact. Whiteline’s polyurethane bushings, sway bars, control arms, and alignment correction kits are engineered using finite element analysis and validated on track before they reach the market. Their components are direct-fit, bolt-on solutions designed for enthusiasts who want real performance gains without fabrication or custom work.

The RallySport Take

Don’t undermine a quality sway bar with worn or incorrect mount bushings. This is the correct 24mm front bushing for the GD WRX. Installation is a straightforward bar swap — remove the OEM bar, install the Whiteline unit with the provided polyurethane mount bushings, connect the endlinks. Start in the middle adjustment position and move from there. Adjustable endlinks are a worthwhile companion purchase if the car has been lowered, ensuring the bar operates at zero preload at the new ride height.

What’s in the Box

• 24mm front sway bar mount bushing for 2002-2007 Subaru WRX (sedan and wagon)
• Whiteline polyurethane compound
• Knurled inner ID retains grease
• Direct-fit to OEM front mount bracket

Fitment