Whiteline 24mm Front Stabilizer Bar Bushing – Universal Subaru Fit

Whiteline 24mm Front Stabilizer Bar Bushing – Universal Subaru Fit

Stop the Bar from Moving — Get the Performance You Paid For
Sway bar mount bushings are the interface between the bar and the chassis. When they wear out or are replaced with cheap rubber substitutes, the bar develops axial slop — it shifts in its mounts under load and loses effectiveness before it even starts twisting. Whiteline’s 24mm polyurethane bushing eliminates that movement, keeping the bar locked in position and transmitting roll forces directly to the suspension.

DETAILS

• Fits 24mm diameter sway bars
• Whiteline proprietary polyurethane compound — significantly stiffer than OEM rubber
• Knurled inner ID retains grease for reduced friction and noise
• Limited Lifetime Warranty
• Universal fitment for Subaru applications with 24mm sway bars
• Latest high-quality synthetic material technology

The Knurled ID — Why It Matters
Most polyurethane bushings develop a dry squeak against the sway bar within a few months because the grease migrates out of the interface. Whiteline machines a knurled texture into the inner bore that physically holds grease in place against the bar. The result is a quiet, lubricated interface that stays that way over the life of the bushing.

Poly vs. Rubber — The Real Difference
Factory rubber mount bushings flex under lateral load, allowing the bar to shift slightly in its cradle. This flex absorbs energy that should be going into the torsional stiffness of the bar itself. Polyurethane eliminates that compliance. The bar stays fixed, and you get the full rated performance of whatever diameter bar you’re running.

Simple Install, Immediate Difference
These are a direct swap for the OEM mounts. Clean the bar, apply fresh grease to the bore and bar contact surface, press in, torque down. If you’re installing a new aftermarket 24mm sway bar, these are the correct mount bushings to go with it. Don’t pair quality hardware with worn mounts.

Why Choose Whiteline

Whiteline has been engineering suspension components from their facility in Australia since 1979. Every product in their catalog is developed with a clear goal: measurable improvement in handling, stability, and tyre contact. Whiteline’s polyurethane bushings, sway bars, control arms, and alignment correction kits are engineered using finite element analysis and validated on track before they reach the market. Their components are direct-fit, bolt-on solutions designed for enthusiasts who want real performance gains without fabrication or custom work.

The RallySport Take

If you’re putting a 24mm bar on your Subaru — or if the existing 24mm bar is clunking in worn rubber mounts — this is the correct bushing. Not complicated, but important. Budget an afternoon for the job — bushing replacement is not complicated but does require the correct press tools and clean installation technique. Apply grease to all polyurethane-to-metal interfaces and assemble at ride height for correct bushing set. The improvement in chassis feel is immediate and the polyurethane will outlast whatever rubber is in there now.

What’s in the Box

• Whiteline proprietary polyurethane compound — significantly stiffer than OEM rubber
• Knurled inner ID retains grease for reduced friction and noise
• Universal fitment for Subaru applications with 24mm sway bars
• Latest high-quality synthetic material technology

Fitment